TSK / KS / Disco Probers
Solid State Disks Ltd
Dependable Data Storage Solutions
We offer high reliability solid-state replacement drives for a wide variety of semiconductor fabrication equipment.
Our CF2SCSI™ SCSIFlash™ drives can be used to replace drives with either internal storage media, such as magnetic HDDs and SSDs, or which use removable media such as magnetic tapes, optical disks (CD / DVD), floppies and solid-state memory cards.
Probe stations we have supplied drives for include:
KLA 1011
KLA 1007
RapidTran II
TEL P8E
TEL P8LC
TEL P8
TEL P8XL
TEL P12 XL
TEL P12 XLn
TEL P12 KLn+
TEL 20SR
TEL Precio Octo
TSK FP2000A
TSK UF200
Semics Opus 2
SUN Sparc 5
SUN Sparc 10
SUN Sparc 20
Obsolete drives we can emulate include:
IBM DNES_309170 9.1GB 2.5” SCSI
IBM DCAS-34330W 4.3GB 3.5” SCSI
Seagate ST34520N 4.5GB 3.5” SCSI
Seagate ST15150N 4.3GB 3.5” SCSI
Seagate ST39204LC 9.1GB 3.5” SCSI
Teac FC 1 1.44MB 3.5” SCSI Floppy
Teac FC 5 1.44MB 3.5” SCSI Floppy
Toshiba MK1842FBC 2.5” SCSI
Toshiba MK1924FBV 2.5” SCSI
We have a worldwide network of authorised installers plus we can provide training for installation (legacy to emulator switchover) and operation, such as backups and system recovery.
Where to next?
What is SCSIFlash™?
Our drive solves the growing and increasingly expensive problem of repairing or replacing ageing and failing SCSI-based 2.5-inch, 3.5-inch and 5.25-inch hard disk drives, magneto optical drives, quarter-inch tape drives and floppy disk drives on computer-based legacy equipment used in telecoms and other industries.
Combining proven SCSI drive architectures with industry-standard, solid-state Flash-based memory technology, our drives are drop-in replacement for any style of SCSI-based drive.
We have two families of products:
- SCSIFlash™. The storage media used is Compact Flash (CF), up to 128GB capacity, and the SCSI interface (SASI, SCSI-1 and SCSI-2 architectures) is standard (narrow) 8-bit with data transfer rates of up to 10MB/s.
- SCSIFlash-Fast™. The storage media used is either CFast or M.2 SSD, up to 1TB capacity, and the data transfer rate is up to 80MB/s. SASI, SCSI-1, SCSI-2 and Ultra3 are supported, and the interface is automatically detected as being standard/narrow (8-bit SCSI, wide (16-bit) SCSI, single-ended (SE) or low voltage different (LVD) signalling.
Our drives are completely programmable, enabling the SCSI driver implementation nuances of the original equipment to be fully emulated. This means you won’t have to make any changes to your system. Our drives are truly swap-in replacements.
For further information on SCSIFlash and SCSIFlash-Fast, and to access data sheets, please visit here:
