Ericsson AXE-10 IOG11 & AXE-10 IOG20

Solid State Disks Ltd

Dependable Data Storage Solutions

AXE-10 SCSI Solid State Drive

We offer high reliability solid-state replacement drives for a wide variety of telecoms equipment.

Our CF2SCSI™ SCSIFlash™ drives can be used to replace drives with either internal storage media, such as magnetic HDDs and SSDs, or which use removable media, such as magnetic tapes, optical disks (CD / DVD), floppies and solid-state memory cards.

For example, our drives have already been used to replace the following:

Ericsson AXE-10 IOG11 hard disk drive module #ROF 137 7942/8 R1A HD-B 2GB (HECI DNPQAL9AAA) and Fujitsu M2954S

Ericsson AXE-10 IOG11 optical disk drive module #ROD 907 32 (HECI DNMYABKEAA)

Ericsson AXE-10 IOG-20 optical disk drive Sony SMO-F551 and MCJ3230SS-S Magneto Optical

Ericsson AXE-10 IOG-20 hard disk Seagate ST34520N (4.5GB)

Note, other HDD & magneto optic (removable) SCSI firmware is available for AXE-10 IOG-20 switches.

Our drives have been verified on Ericsson AXE-10 IOG11 & AXE-10 IOG20 test beds, been subjected to live network testing and are currently deployed in a major operator network.

Where to next?

What is SCSIFlash™?

Our drive solves the growing and increasingly expensive problem of repairing or replacing ageing and failing SCSI-based 2.5-inch, 3.5-inch and 5.25-inch hard disk drives, magneto optical drives, quarter-inch tape drives and floppy disk drives on computer-based legacy equipment used in telecoms and other industries.

Combining proven SCSI drive architectures with industry-standard, solid-state Flash-based memory technology, our drives are drop-in replacement for any style of SCSI-based drive.

We have two families of products:

  • SCSIFlash™. The storage media used is Compact Flash (CF), up to 128GB capacity, and the SCSI interface (SASI, SCSI-1 and SCSI-2 architectures) is standard (narrow) 8-bit with data transfer rates of up to 10MB/s.
  • SCSIFlash-Fast™. The storage media used is either CFast or M.2 SSD, up to 1TB capacity, and the data transfer rate is up to 80MB/s. SASI, SCSI-1, SCSI-2 and Ultra3 are supported, and the interface is automatically detected as being standard/narrow (8-bit SCSI, wide (16-bit) SCSI, single-ended (SE) or low voltage different (LVD) signalling.

Our drives are completely programmable, enabling the SCSI driver implementation nuances of the original equipment to be fully emulated. This means you won’t have to make any changes to your system. Our drives are truly swap-in replacements.

For further information on SCSIFlash and SCSIFlash-Fast, and to access data sheets, please visit here:

ABOUT SCSIFLASH™
Shape Shape