Iskratel SI2000
Solid State Disks Ltd
Dependable Data Storage Solutions
We offer high reliability solid-state replacement drives for a wide variety of telecoms equipment.
Our CF2SCSI™ SCSIFlash™ drives can be used to replace drives with either internal storage media, such as magnetic HDDs and SSDs, or which use removable media, such as magnetic tapes, optical disks (CD / DVD), floppies and solid-state memory cards.
If you have an Iskratel SI2000 automatic telephone exchange and its legacy data storage device (typically a SCSI-based 514MB capacity Quantum Daytona Go-Drive 2.5-inch HDD) is starting to fail, or you fear they might soon, we can help.
Specifically, our 2.5-inch (2.5”) SCSISSD can be programmed to emulate the behaviour of your old drive. It will be a swap-in replacement, meaning you won’t need to make any changes to your Iskratel SI2000 – plus you benefit from the high reliability and lower power consumption benefits derived through solid-state technology.
Where to next?
What is SCSIFlash™?
Our drive solves the growing and increasingly expensive problem of repairing or replacing ageing and failing SCSI-based 2.5-inch, 3.5-inch and 5.25-inch hard disk drives, magneto optical drives, quarter-inch tape drives and floppy disk drives on computer-based legacy equipment used in telecoms and other industries.
Combining proven SCSI drive architectures with industry-standard, solid-state Flash-based memory technology, our drives are drop-in replacement for any style of SCSI-based drive.
We have two families of products:
- SCSIFlash™. The storage media used is Compact Flash (CF), up to 128GB capacity, and the SCSI interface (SASI, SCSI-1 and SCSI-2 architectures) is standard (narrow) 8-bit with data transfer rates of up to 10MB/s.
- SCSIFlash-Fast™. The storage media used is either CFast or M.2 SSD, up to 1TB capacity, and the data transfer rate is up to 80MB/s. SASI, SCSI-1, SCSI-2 and Ultra3 are supported, and the interface is automatically detected as being standard/narrow (8-bit SCSI, wide (16-bit) SCSI, single-ended (SE) or low voltage different (LVD) signalling.
Our drives are completely programmable, enabling the SCSI driver implementation nuances of the original equipment to be fully emulated. This means you won’t have to make any changes to your system. Our drives are truly swap-in replacements.
For further information on SCSIFlash and SCSIFlash-Fast, and to access data sheets, please visit here
