This document describes the features of the Solid State Disks Ltd. (SSDL) Disk Duplicator and the user interaction required to control the duplication process.
The Card Duplicator allows the contents of a CF card used in a SSDL emulator to be copied, block-for-block and requiring only a single button press to operate.
There are two options for the number of blocks copied, either the full capacity of the Master CF card, or the number of blocks of the emulation that the Card Duplicator is set to. This second option is not recommended unless the operator is familiar with setting and checking the emulation that the CopyStation is set to and can ensure that it matches that of the original Solid State Disks supplied emulator that the target CF card was used in.
While some information on using this option is included in Section 4 on page 10, full instructions are beyond the scope of this document.
